Epilog Fusion Tech SpecsSystem Details
Epilog Fusion M2 32 | Epilog Fusion 40 | ||
---|---|---|---|
Engraving Area | 32" x 20" (812 x 508 mm) |
40" x 28" (1016 x 711 mm) |
|
Maximum Material Thickness | 14.25" (361 mm) | 13.25" (336 mm) | |
Laser Wattage | 30, 40, 50, 60, 75 or 120 watts Dual source: CO2 50, 60, or 75; Fiber 20, 30, or 50 watts |
30, 40, 50, 60, 75 or 120 watts | |
Laser Source | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | ||
Intelligent Memory Capacity | Multiple file storage up to 128 MB. | ||
Air Assist | Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. | ||
Laser Dashboard | The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages. | ||
Red Dot Pointer | Since the laser beam is invisible, the Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire. | ||
Relocatable Home | When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Fusion Series Lasers. | ||
Operating Modes | Optimized raster, vector or combined modes. | ||
Motion Control System | High-speed Brushless DC Servo Motors. | ||
X-Axis Bearings | Ground and polished stainless steel Long-Lasting Bearing System. | ||
Belts | Kevlar (x-axis) and Steel Cord (y-axis) belts. | ||
Resolution | User controlled from 75 to 1200 dpi. | ||
Speed and Power Control | Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color. | ||
Print Interface | 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8. | ||
Size (W x D x H) | 52.5" x 34.88" x 40.75" (1334 x 886 x 1035 mm) |
60.5" x 41.25" x 42.25" (1537 x 1048 x 1073 mm) 43" (1092 mm) deep with exhaust plenum. |
|
Weight | 500 lbs (227 kg) | 643 lbs (292 kg) | |
Electrical Requirements | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC. | ||
Maximum Table Weight | Fusion M2 32/40: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting. | ||
Ventilation System | 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4" (102 mm) in diameter. | 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4" (102 mm) in diameter. |