Skip to content
Epilog Fusion FiberMark Laser Series Group

Epilog Fiber Laser Systems

By Epilog Laser

Epilog's premium top-of-the-line engraving and cutting systems..

Get a Quote

Epilog Fiber Tech SpecsSystem Details

FiberMark 24 Fusion M2 32 Fusion M2 40 G2 Galvo
Engraving Area 24" x 12"
(610 x 305 mm)
32" x 20"
(812 x 508 mm)
40" x 28" 
(1016 x 711 mm)
Up to 24" x 24" 
(609 mm)
Focal Length
(F-Theta Lens)
3" (76.2 mm) 3" (76.2 mm) 3" (76.2 mm) NA
Maximum Material Thickness 5" (127 mm) 12.5" (317 mm) 12.25" (311 mm) 4" x 4" (101 mm): 36.3" (923 mm)
16" x 16" (406 mm): 25.98" (660 mm)
24" x 24" (609 mm): 15.79" (401 mm)
Laser Wattage 20, 30, or 50 watts 20, 30, or 50 watts 20, 30, or 50 watts 30 and 50 watts
Laser Type Solid State Pulsed Ytterbium Fiber Laser (air cooled).
Mode of Operation Pulsed 20-80 kHZ.
Repetition Rate (Frequency) 20 kHZ - 100 kHz depending on the laser wattage.
Intelligent Memory Capacity Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved. Multiple file storage up to 128 MB. Multiple file storage up to 128 MB. NA
Air Assist Attach the included air compressor to our Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the marking surface. NA
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer allows you to have a visual reference for locating where the laser will fire. Red Dot Trace Feature
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand (FM 24) or joystick (Fusion M2) with the convenient Movable Home Position features on the FiberMark Laser. NA
Operating Modes Raster, vector or combined modes. Optimized Vector Mode
Motion Control System High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning.
X-Axis Bearings Ground and polished stainless steel long-lasting bearing system. Self lubricating on the FiberMark Fusion
Belts Advanced B-style Kevlar belts. Double-wide Kevlar (x-axis) and Steel Cord (y-axis) belts. NA
Resolution User controlled from 75 to 1200 dpiNA
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10.
Size (W x D x H) 34.5" x 24.5" x 16"
(876 x 622 x 406 mm)
52.5" x 33.75" x 40.75"
(1334 x 857 x 1035 mm)
37.75" (959 mm) deep with exhaust plenum.
60.5" x 41.25" x 42.25"
(1537 x 1048 x 1073 mm))
43" (1092 mm) deep with exhaust plenum. 
33" x 43.75" x 71.1" (838.2 x 1111.25 x 1805.94 mm)
Weight 120 lbs (55 kg)without stand 500 lbs (227 kg) 643 lbs (292 kg) 415 lbs (188.2 kg)
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Maximum Table Weight 200 lbs (90 kg) for static and 80 lbs (36 kg) for lifiting. 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.  
Ventilation System 350 - 400 CFM (595-680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4" in diameter. 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration unit is required. There are two output ports, each 4" (102 mm) in diameter.
Request Pricing Innovative Cutting Systems - Epilog, BOFA, & Electrox Distributor Arizona, Utah, Colorado, Wyoming, Nevada, Montana, and Idaho